Have Any Questions?

01902 491 118

Operating Hours

Mon - Fri 07:30-17:00

Email Us


Proper Filter Application

When selecting a new filter assembly or replacement filter, it’s important to first answer some basic questions about your application. Where will the filter be used? What is the required cleanliness level (ISO code) of your system? What type of oil are you filtering? Are there specific problems that needed to be addressed? Proper Filter Application is key.

It’s also important to think about the viscosity of the fluid in your system. In some machinery lubrication applications, for example, the oil is very thick and has a tougher time passing through the layer of media fibres. Heating techniques and the addition of polymers can make the liquid less viscous and therefore easier to filter. Another option is to install a filter with larger media surface area, such as the Donaldson W041 or HRK10 low pressure filters, that can accommodate more viscous fluids.

Next, think about duty cycle and flow issues. Working components such as cylinders often create wide variations in flow — also called pulsating flow — that can be problematic for filters with higher efficiency ratings. On the other hand, dedicated off-line filtration (also called “kidney loop”) produces a very consistent flow, so it makes sense to use a more efficient filter.

Filters used in applications with steady, continuous operation at lower pressures will last longer than filters that must endure cycles of high pressure pulsating flow. Generally, the lower the micron rating of a filter, the more often it needs to be changed since it is trapping more particles.

Finally, it’s wise to ask yourself, “How much is my equipment worth?” Calculate how much it would cost to replace the equipment in your system, in case of component failure, and make sure those areas are well protected with proper filtration. (For example, high performance servo valves are very sensitive, costly components that need to be protected with finer filtration media.)

Minimizing maintenance costs through good contamination control practices requires proper filter application based on the specific contamination problems. Good contamination control means cost effective filtration. When looking for a filter, first assess the needs of your system and any problem areas.

At Sterling Filtration Ltd we can help you to spec up the filter elements and complete units you require to achieve the level of filtration you need to protect your equipment from damaging wear and tear. Call us today on 01902 491118 and one of our experts can service your needs.

The Filter Guys

About The Filter Guys

The Filter Guys are here to help with your inquiries and orders. Call us on 01902 491118 for help and advice. We're here to service your filter needs!