Have Any Questions?

01902 491 118

Operating Hours

Mon - Fri 07:30-17:00

Email Us

info@sterlingfiltration.co.uk

In-line Fuel Filters – October Special Offer

The Filter Guys

For October we are practically giving away In-line Fuel Filters. Our general purpose paper in line filter, GF2018D, that comes with 6mm/8mm ports are just 85p each.

Why not take advantage of this offer and drop in to see us and grab them. This offer will end on Halloween. Avoid any horror and fill your in line fuel filter stocks up today!!

Covid-19 precautions are in place at our trade counter but we are allowing customers in, one at a time, to see us as long as you are wearing a face covering and you observe social distancing rules. Hand sanitiser is freely available.

In-line Fuel Filters – October Special Offer

The Filter Guys

For October we are practically giving away In-line Fuel Filters. Our general purpose paper in line filter, GF12, that comes with 6mm/8mm ports are just 75p each.

Why not take advantage of this offer and drop in to see us and grab them. This offer will end on Halloween. Avoid any horror and fill your in line fuel filter stocks up today!!

Covid-19 precautions are in place at our trade counter but we are allowing customers in, one at a time, to see us as long as you are wearing a face covering and you observe social distancing rules. Hand sanitiser is freely available.

 

Water and Draining Fuel Filters

The Filter Guys

Most primary fuel filters have drains that allow the operator to drain the water that has been separated by the filter. The frequency with which the primary fuel filter needs to be drained is ultimately dependent on the quality of fuel that is being used. Most OEMs recommend draining your water separator daily. It is also recommended to pay attention to how much water is removed at each drain and adjust the frequency of servicing accordingly.

Why Remove Water in Fuel?

Water in fuel can prematurely wear and oxidize the steel components within the fuel injectors, leading to:

  • Rusting and corrosion of components
  • Governor/metering component failure
  • Sticky metering components (both pump and nozzle)
  • Injection component wear and seizure

Free or emulsified water must be removed from the fuel to prevent corrosion and damage to the fuel system. Fuel additives may claim they remove water, when really they dissolve the water. Which in turn, will pass through the filter and enter fuel injectors.

Types of water contamination in diesel fuel:

1) Emulsified water: water suspended in the fuel

2) Free water: water separated from the fuel and generally collected at the bottom of the fuel or the fuel storage tank

3) Dissolved water: water chemically dissolved in the fuel

Maintenance Recommendations & Guidelines

  • Drain water from your primary filter daily when refueling
  • Carry a spare set of fuel filters in case you receive a “bad” load of fuel
  • Never switch to more open filter to get longer filter life, you are trading away fuel pump and injector life
  • Never use fuel to lube the gasket. Fuel isn’t as slick as oil and if you use fuel it could cause gaskets to bunch or pinch when it is tightened, causing the filter to leak.

If using biodiesel:

  • make sure your fuel supplier meets current fuel standards
  • make sure your engine is compatible with the concentration (or percent) biodiesel you wish to use
  • When using your own fuel storage tank, remember that removing contaminants before they reach the vehicle is the best practice. Ensure you have effective bulk storage tank filtration.

 

Fuel Filtration F.A.Q’S

The Filter Guys

Q1: Please explain the differences between the primary and secondary fuel filters in terms of the type of medium used, micron rating, and so forth.

Differences between primary and secondary filters vary from system to system, but in general, primary filters are used to separate water and larger particles (7-25 μm efficiency). Secondary filters are for final filtration (3-5 μm efficiency). Primary filters usually will have treated media to provide water separation performance. This can be either cellulose or a multi-layered synthetic media called melt-blown coupled with cellulose like Donaldson’s SynteqTM media. Secondary filters have untreated, multi-layered cellulose or purely synthetic media. These differences mainly have to do with the water separation requirements placed on primary fuel filters.

 

Q2: Have micron (μm) ratings become smaller and smaller as injection technology has advanced? When replacing filters, how do you make sure you have the micron rating that’s appropriate for your generation of engine and its injection system?

As injection technology has advanced and injection system pressures have increased the filtration

requirements have become more demanding. These systems have required filtration technology to be more and more efficient. When replacing your filters be sure you use an OEM approved replacement or a direct cross from a reputable filter manufacture to ensure you are using a filter that is appropriate for your engine.

 

Q3: Some truckers used to use a fine primary filter to avoid changing the secondary, while the original equipment concept was to use a coarse primary (on the suction side) and a fine secondary (on the pressure side). This took extra changes, but they liked the idea of avoiding changing the secondary. Is doing this impractical on modern engines?

Primary and secondary filters are usually balanced to provide the required engine protection and the optimum filter life. Placing a fine filter in a primary (suction) filter location is impractical because they can not tolerate as much pressure drop and will need to be changed very often. Generally, fine filters do not contain the required water separation in a primary filter.

 

Q4: How have new engine designs affected fuel filtration?

In the past, diesel engines had either mechanical fuel injectors or unit injectors. The drive to develop engine that meet emissions regulations has led to the application of common rail fuel injection systems. The higher pressures of common rail systems enables more precise control of fuel delivery and control of the combustion process. The goal of the new technology is to reduce the particulate matter and NOx coming out of an engine system, thereby reducing the burden on after treatment systems. The very high pressures in the common rail systems require tighter tolerances, elevating the requirements for cleanliness and efficiency on new and future fuel systems. This has created the need for increasingly better fuel filtration technology. Donaldson offers a range of products for those demanding conditions and is developing solutions for tomorrow’s requirements.

 

Q5: Will common rail systems bring any changes in terms of fuel filter requirements? If so, can you say what will they be?

Most fuel injection systems today are already common rail or close derivatives. The technology itself does not drive specific changes, the injection pressures and desired filter service intervals are more influential.

 

Q6: How important is filtering fuel stored in bulk tanks?

It’s becoming very important and can reduce future vehicle maintenance downtime. If you’re using a bulk fuel tank, filtering the fuel BEFORE putting in your vehicle is another great practice that can reduce contaminant and water from the fuel before refilling your vehicle tank. Over time, tanks can corrode, water condensation can build up, contaminant could enter the tank opening during fills.

 

Q7: I’ve been handling my diesel the same way for years. Why should I change the way I store fuel?

With the exception of reducing sulfur content, fuel standards have not changed substantially in over a decade. Engines, however, have changed dramatically. In order for new equipment to run trouble-free, they require much cleaner fuel. This means an increased need for filtration. Manufacturers are insistent that damage caused by fuel contaminants is not a factory defect. Therefore, it is in your best interest to filter your fuel prior to use.

 

Q8: Shouldn’t it be my fuel supplier’s responsibility to deliver clean diesel?

More than likely, your supplier is delivering perfectly in-spec diesel. The problem is that diesel cleanliness specifications are woefully out of date when compared to the needs of the modern engine. Some distributors are starting to go the extra yard and filter diesel prior to delivery, but this is not an industry requirement. An additional note of caution: the term “clean diesel” can also be used when referring to ultra-low sulfur diesel. This is not the same as reduced contamination levels or fuel “cleanliness”.

 

Q9: My fuel filters are plugging up really quickly. Should I change brands?

It is important to use high quality fuel filters to protect your engine. In most cases changing filter brands will NOT solve your fuel problems. Remember, a plugged filter did its job. Rapid filter plugging is an indication that there is a problem with the fuel, not the filter. The key to resolving rapid plugging issues is to determine how filterable solids are getting into or forming inside your fuel tank, and then fixing the root cause. Switching to a lower efficiency filter, regardless of brand, will simply spread the problem throughout your fleet.

 

Q10: The injectors and fuel pumps on my new equipment keep failing; what can I do?

The first step is to speak with your Original Equipment supplier. If you suspect that dirty fuel is behind the problems, a simple test can verify your fuel cleanliness level. Make sure you put the cleanest fuel possible into your equipment and protect your engine with a high efficiency fuel filter. This should eliminate injector and fuel pump problems due to dirty fuel.

 

Q11: Diesel is diesel, right? Why not buy from the cheapest source?

As with anything, you typically get what you pay for. Diesel is expensive, so it is tempting to minimize operating expenses by purchasing the cheapest fuel possible. While this fuel may meet minimum industry standards, that may not be adequate. Small differences in handling practices can have a huge impact on overall fuel quality and cleanliness. Saving a few pennies on your fuel bill may end up costing you far more in downtime, lost production and equipment repairs. Partnering with a good supplier is one of your best defenses against unforeseen fuel quality issues.