Have Any Questions?

01902 491 118

Operating Hours

Mon - Fri 07:30-17:00

Email Us

info@sterlingfiltration.co.uk

We Offer Donaldson Engine and Hydraulic Aftermarket Filters to replace Baldwin Filters in the UK.

The Filter Guys

We Offer Donaldson Engine and Hydraulic Aftermarket Filters to replace Baldwin Filters in the UK.

At Sterling Filtration Ltd we offer over 3,000 Donaldson equivalent filters to replace your Baldwin filters. They cover a huge range of engine filters (main air, safety air, lubricating oil, fuel, fuel water separators) and hydraulic system filters.

Please check out our range by clicking on the Donaldson Brand Icon below.

If you have any requirements for Baldwin equivalent filters please give us a call today on 01902 491118. We are here to service your filter needs!

Filter elements for compressors.

The Filter Guys

Filter elements for compressors.

Pneumatic tools are ineffective if not maintained correctly. Dirt and liquid particles in your compressors air line can cause lengthy and expensive breakdowns or completely destroy your equipment. Regular maintenance is essential to avoid this happening especially at this time of year when cold temperatures can cause freezing of water droplets that may collect in your air lines.

Sterling Filtration Ltd can offer a wide range of filter elements to service your compressor machine needs. We have a wide range of parts available through our extensive supply chain to service machines including, but not limited to, Ingersoll Rand, Zander, Bauer, Hydrovane, Kaeser, Husky and Compair compressors.

We supply 1, 0.1 and 0.01 micron filter elements for inline compressed air use as well as being able to offer the complete assemblies too. We also stock air, oil and fuel filters for large compressor engines as well as air/oil separators for many applications.

Remember it is cost effective to regularly service your filter elements than not service your equipment. A strict maintenance procedure can stop a problem before it starts.

Worried About Water in Your Air Intake System?

The Filter Guys

Worried About Water in Your Air Intake System?

Sometimes you can’t help operating equipment in extreme moisture environments especially during the spring when the weather is unpredictable, but it’s good to be mindful of a few things to help keep your air intake system running at top efficiency.

Typical Symptoms of Water Ingestion:

  • High Restriction indications.
  • Mud caked in the VacValve
  • Wet, wavy air filter media
  • System rust, corrosion and/or water damage
  • Moisture-related environmental problems such as icing

Simple Tips to Keep Water Out of Your System:

  • Check and clear the VacValve daily
  • Make sure the air cleaner cover and filter are installed properly
  • Inspect air intake system for any leaks

Remember, a water-soaked air filter will occasionally lock-up a restriction indicator. Wet filters should always be replaced as they are prone to tear at weak, wet spots on the media. This would then allow the air flow to bypass the filter allowing dirt and debris into your air intake.

A restriction indicators ‘lock-up” restriction level is generally marked on the indicator itself. To check an indicator, remove it, wipe the base clean, then apply a small amount of vacuum. If the indicator locks up, it should still be okay to reuse this way. If not be sure to replace the indicator.

Donaldson Air cleaner assemblies and accessories are available to buy from Sterling Filtration Ltd.

Donaldson Filtration

Diesel Fuel & the Cold Weather.

The Filter Guys

Diesel Fuel & the Cold Weather.

Diesel is the most commonly used fuel in heavy duty applications and requires filtering to ensure that any contaminants have been removed before they can cause stoppages, or serious damage resulting in complete failure, to the diesel system components. In-line fuel elements can stop the larger, damaging contaminants such as rust and sediment from the fuel tank entering the fuel system.

Diesel filters are important as they have to protect the fuel pump and injectors not only from abrasive particles but also from minute droplets of water often found in diesel fuel. Injectors and diesel pumps are precision machined components and are very costly to repair or replace. It is much more cost effective to change the filters at their regular service intervals rather than have to pay the cost of even one breakdown repair bill.

You also have to remember that at this time of year water in your fuel (or in any of your machines liquids) can freeze causing damage, blockages and downtime for your engine or machine so its important to maintain water separation from diesel to prevent avoidable issues when the weather is sub zero.

Sterling Filtration offers a range of replacement fuel filter elements and spin on canisters. We can also offer various fuel housings for particulate and water removal and fuel additive for maintenance of your fuel system.

Fuel Filter Maintenance – Know Your Basics.

Best practices for fuel maintenance intervals.

  • Drain water from your primary filter daily when refuelling.
  • Carry a spare set of fuel filters in case you receive a bad load of fuel.
  • Never switch to more open filters to get longer filter life – this will reduce fuel pump and injector life.
  • If using biodiesel, make certain your fuel supplier meets current fuel standards.
  • Ensure that your engine is compatible with the concentration (or percent) biodiesel you wish to use.
  • When using your own fuel tank, remember that removing contaminants before they reach the vehicle is the best. Therefore, it is best to use some type of bulk filtration or filtering funnel (also available from Sterling Filtration Ltd).

TB1394 – Air Brake Dryer.

The Filter Guys

We are currently offering a one time special offer for fifteen units of the air brake dryer TB1394 at the knockdown price of £30.00 per unit.

This filter is the equivalent to:

  • Baldwin – BA5566
  • Donaldson – P951415
  • Knorr Bremse – K005686
  • Knorr Bremse – K014712
  • Knorr Bremse – K039453
  • Mahle – AL26
  • Mann Filter – TB1394/5
  • Renault – 5001865404
  • Renault – 7421267793
  • Schupp – ST1393
  • Volvo – 20754416
  • Volvo – 21267818
  • Wabco – 4329012452

Call now and save yourself a small fortune on your air brake dryer requirements.

This offer is a first-come first-served, whilst stocks lasts, limited offer. So don’t delay, call Sterling Filtration, today.

– 10th March 2017.

Worried About Water in Your Air Intake System?

The Filter Guys

Worried About Water in Your Air Intake System? Sometimes you can’t help operating equipment in extreme moisture environments, but it’s good to know a few things to help keep your air intake system running at top efficiency.

Typical Symptoms of Water Ingestion:

  • High Restriction indications.
  • Mud caked in the VacValve
  • Wet, wavy air filter media
  • System rust, corrosion and/or water damage
  • Moisture-related environmental problems such as icing

 

Simple Tips to Keep Water Out of Your System:

  • Check and clear the VacValve daily
  • Make sure the air cleaner cover and filter are installed properly
  • Inspect air intake system for any leaks

Caution: A water-soaked air filter will occasionally lock-up a restriction indicator!

A restriction indicator’s ‘lock-up” restriction level is generally marked on the indicator itself. To check an indicator, remove it, wipe the base clean, then apply a small amount of vacuum. If the indicator locks up, it should still be okay to reuse this way. If not be sure to replace the indicator. Air filters, complete air cleaner assemblies and associated spares and parts are available from Sterling Filtration Ltd.

Air filters: What is the purpose of a safety filter?

The Filter Guys

What is the purpose of a safety filter? Safety filter, secondary filter, inner filter; there are many names, we prefer to call it a safety filter.

A safety filter backs up the primary filter, and protects the clean air ducting while the primary is out of the housing during service. The engine should never be run with only a safety filter in place.

The safety filter is NOT a spare filter! Its purpose is to protect the engine if something goes wrong with the primary (main) filter. Until then, all it does is take up space and add a little bit of restriction.

What can go wrong with the primary filter?

It may have hidden damage from shipping that you missed when you inspected it before installation; damage from cleaning (if you carry out such an unrecommended procedure); maybe even a manufacturing glitch; mis-installation by the mechanic (but this never happens, right?); a ‘will-fit’ that doesn’t quite fit; or it’s the wrong part altogether and doesn’t fit at all into the housing (but mechanics would never try this, would they?)

All of these things happen more often than any of us like to think. We determined many years ago that a really good way to provide additional protection for large engines operating in heavy dust conditions was to always offer and for you to always use a safety filter.

There are some characteristics about the safety filter which you should be aware of, so you understand what it does and doesn’t do for your engine:

  • is smaller than the main filter, with less media.
  • is more open and less efficient for lower restriction.
  • has less contaminant-holding capacity so that it will plug rapidly if any engine-damaging dust particles get past a damaged primary filter.

A safety filter offers protection against mistakes when fitting and reduces the need to open the clean air side of the system by 66% (they usually only need changing once every three main filter changes) compared to systems without a safety filter. They are an excellent insurance against contaminants entering your engine and upon a critical failure of the main element can save your engine from serious damage.

Threaded Compressed Air Filters

The Filter Guys

Sterling Filtration offers a comprehensive range of threaded Compressed Air Filters with 19 models offering connections from ¼” to 3” and capacities up to 2550 Nm3/h (1500SCFM)

Optimised modular housing design ensures high performance, ease of installation and multiple close coupling. Manufactured in cast aluminium alloy with Walker E-coat protection for a robust and corrosion resistant product.

Custom engineered media for optimised performance & efficiency

Oleophobic borosilicate media and a custom engineered anti re-entrainment layer guarantees exceptional dirt holding and drainage. Unique material construction minimises pressure drop and improves energy efficiency.

Self centralising, drop-fit, ant-vibration, colour coded elements

A unique endcap design which engages with the bowl, prevents vibration, improves stability and assists drainage. Colour coded elements make grade identification swift and simple.

Intelligent, unique, modular filter housing design

  • Filter elements are available in 25, 5, 1, 0.1 and 0.01 micron.
  • Pop up indicators are fitted as standard to some designs.
  • Differential pressure indicators are fitted to some designs.
  • Activated carbon filters must not operate in oil saturated conditions and will not remove certain types of gases including carbon monoxide and carbon dioxide.
  • Filter elements should be changed every 12 months or 8000 hours, whichever comes first.