Have Any Questions?

01902 491 118

Operating Hours

Mon - Fri 07:30-17:00

Email Us

info@sterlingfiltration.co.uk

What we need to spec up your hydraulic filter requirements.

What we need to spec up your hydraulic filter requirements.

When looking to identify a filter housing for your specific problem we need to know a little bit about what you are trying to achieve and where in your hydraulic circuit you need to fit it. To do this we require a few key pieces of information to ensure correct fit and operation for you. That being:

Port Sizes. What size pipe-work are you fitting the housing into? In many cases this is a BSP measurement.

Operating Pressure. Is the filter operating as a return line, tank top return, pressure or suction filter, or is it simply an in-tank suction strainer?

Flow rate. What is the flow of the hydraulic oil in litres per minute?

Micron. It is important to get the micron rating correct to ensure that you are protecting delicate parts of your hydraulic system further along the flow route from damaging wear particles.

With this information we can then source and supply the correct filter unit. Contact us on 01902 491118 with your hydraulic filter enquiries or contact us via our website Online Enquiry Form.

We can also offer a range of replacement filter elements and housing indicators to help keep you informed when your filters require changing.

Donaldson Filter Housings & Accesories

Hydraulic Filtration Systems and accessories.

Donaldson develops, manufactures and markets a full line of hydraulic filters for the protection of machinery and components in hundreds of applications on heavy duty mobile equipment. When you need high, medium or low pressure filters, filter housings, filter heads, replacement cartridges, spin-ons or hydraulic accessories, turn to Sterling Filtration, authorised distributors of Donaldson filters. We also offer a broad line of replacement filter elements.

Donaldson heavy duty high pressure filters sit behind pumps and other prime movers to protect critical hydraulic components such as cylinders, motors and valves. All contain our Synteq ® synthetic filter media, specially developed by Donaldson for high efficiency liquid filtration. Working pressures range from 140 to 420 bar and static pressures from 310 to 830 bar.

Donaldson Duramax ®, well known as the highest rated medium pressure filters available, are most often used in return line positions. As spin-ons, they are particularly well-suited for the duplex circuits. Donaldson Synteq ® and cellulose media are available. Duramax working pressures range from 25 to 70 bar and static pressures from 55 to 140 bar.

Low pressure filters are the most commonly used type of filters in hydraulic circuits, used most often as return line filters in applications with working pressures up to 10 bar and static pressure up to 20 bar.

An expanded line of accessories for hydraulic lines and reservoirs is also available. Finish off your hydraulic circuit with filter service indicators, pressure gauges, test point assemblies, valves, flanges, reservoir level gauges, sight glasses, a variety of tank and filter breathers, caps vents, plugs, strainers, diffusers, magnets and more.

Donaldson is proud to offer a broad selection of hydraulic replacement cartridges and spin-ons to the aftermarket via its distributors. Choose from our many different filter media to find exactly the right filter to help you meet the cleanliness requirements for your hydraulic system.

Donaldson Filtration

The Filter Guys

About The Filter Guys

The Filter Guys are here to help with your inquiries and orders. Call us on 01902 491118 for help and advice. We're here to service your filter needs!